1
Airsoft Items FOR SALE / Re: For Sale: M700 & ICS AK74 / V.3 gearbox
« on: June 17, 2014, 01:23:21 PM »
Bump
News:
Facebook might hate freedom, but it's still going strong here.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Airsoft Items FOR SALE / Re: For Sale: M700 & ICS AK74 / V.3 gearbox
« on: May 30, 2014, 04:00:00 PM »
pm'd
3
Airsoft Items FOR SALE / For Sale: M700 & ICS AK74 / V.3 gearbox
« on: May 29, 2014, 05:54:46 PM »
Yah its been a very long time since I have even touched any of my airsoft stuff. So I need to sell the last few things I have in the back of my closet.
First is a KJW M700:
Gas powered
FPS is adjustable...up too 660 which is highest I ever chronographed it at.
Comes with 3 magazines
Upgrades: Magpul 650mm 6.03 barrel
-This barrel it longer than the stock one, which was a piece of trash anyways since it was a 6.10, so in the pictures you will see the plug on the end protruding farther than it supposed to be. At the time there were no barrels made for this gun in terms of length. To fix that the barrel would have to be cut down to about 627mm, but otherwise the gun is fully functional.
Asking $100.00
ICS AK74 or the V3 gearbox from it.
This listing is either or. Price will be the same.
Upgraded internals:
M110 spring
Systema polycarbonate piston
Area 1000 metal spring guide
Area 1000 aluminum piston head
Reinforced gears
What it needs:
new switch assembly: http://www.blazingtoys.com/product_p/bterics-mk-32.htm
A Motor
These gearboxs can be dropped in to other guns that are similar and essentially use the same box. So if you want FPS or ROF that is adjustable to the field your are on then having drop in gearboxes is the way to go. I actually did this for awhile since the gearbox is so easy to get in and out.
Asking $100.00
First is a KJW M700:
Gas powered
FPS is adjustable...up too 660 which is highest I ever chronographed it at.
Comes with 3 magazines
Upgrades: Magpul 650mm 6.03 barrel
-This barrel it longer than the stock one, which was a piece of trash anyways since it was a 6.10, so in the pictures you will see the plug on the end protruding farther than it supposed to be. At the time there were no barrels made for this gun in terms of length. To fix that the barrel would have to be cut down to about 627mm, but otherwise the gun is fully functional.
Asking $100.00
ICS AK74 or the V3 gearbox from it.
This listing is either or. Price will be the same.
Upgraded internals:
M110 spring
Systema polycarbonate piston
Area 1000 metal spring guide
Area 1000 aluminum piston head
Reinforced gears
What it needs:
new switch assembly: http://www.blazingtoys.com/product_p/bterics-mk-32.htm
A Motor
These gearboxs can be dropped in to other guns that are similar and essentially use the same box. So if you want FPS or ROF that is adjustable to the field your are on then having drop in gearboxes is the way to go. I actually did this for awhile since the gearbox is so easy to get in and out.
Asking $100.00
4
General Airsoft Discussion / should i buy from evike.
« on: October 25, 2009, 08:41:55 PM »
alright. i have been researching a few products for my gas pistol and the only place that i could find the products was at evike.com aka airsoftpost. now i have heard a lot of bad things about evike from other airsofters, and there advise is no matter the situation, dont do business with them. now my question is, has the advise i have been given entirely true about evike.com, and that i should try and avoid them. or should i have now worries and go ahead and order from them.
5
General Airsoft Discussion / Re: Indor airsoft arena
« on: July 31, 2009, 02:21:45 PM »
i need everyone or as many people as possible to participate in this poll so if you could please select an option....thank you
6
General Airsoft Discussion / Indor airsoft arena
« on: July 31, 2009, 11:40:31 AM »
I am looking into opening a indor arena in the valley with the help from some others. But before I can proceed further in my plan, i need to do a survey on weather i could produce enough income to keep me goin.
Also how much would you be willing to pay as an entrance fee?(answer this in a post)
Also how much would you be willing to pay as an entrance fee?(answer this in a post)
7
Local Games Listing/RSVP / Re: Operation: Sabre Hawk 1/3/09 (UPDATE 12/19/08 expanded ao)
« on: January 03, 2009, 01:17:19 PM »
any problems with the cops? and are there pics
8
Local Games Listing/RSVP / Re: Operation: Sabre Hawk 1/3/09 (UPDATE 12/19/08 expanded ao)
« on: January 02, 2009, 02:05:17 PM »
Merc's i have to let u down...i cant come.....i have called every machine shop on the valley, so they could cut my new Tight bore down to size. and not one of them is open.....but the only way i can come is us my stock barrel which is a stunnung 6.1 and ill prob wount be able to hit a target 20 ft away with that bore size. take lots of pics and vid so cause i realy want to hear the turn out.
9
Local Games Listing/RSVP / Re: Operation: Sabre Hawk 1/3/09 (UPDATE 12/19/08 expanded ao)
« on: January 01, 2009, 11:38:18 PM »
hey guys my chances of comming now are getting slimmer....i NEED to get my new TB to a machine shop so cut down and fitted in my sniper. and if i dont get that done friday i cant come. 
:cry:
:cry:
10
Local Games Listing/RSVP / Re: Operation: Sabre Hawk 1/3/09 (UPDATE 12/19/08 expanded ao)
« on: December 24, 2008, 04:03:19 PM »
i personaly know two attorneys who might be able to help
12
Airsoft Items FOR SALE / Re: UTG Vest
« on: December 22, 2008, 07:38:03 PM »
price lowerd to 40.00
13
Airsoft Items FOR SALE / Re: ICS AK-74
« on: December 22, 2008, 07:33:24 PM »
price lowerd to 140.00
14
Gas Powered Guns / Re: KJW M700 tight bore help
« on: December 16, 2008, 02:49:41 PM »Quote from: "corporalred"
I see you are sportin the sig like mine[smilie=armata_pdt_34.gif] [smilie=armata_pdt_34.gif]
15
Gas Powered Guns / KJW M700 tight bore help
« on: December 16, 2008, 12:22:26 PM »
i have been doing some research on a 6.01 tight bore for the m700. but i have a big problem...i cant seem to find a accurate length. i keep getting mixed answers. like i find that some says to use a M16/AUG barrel, others say PSG1, or 600mm, 590mm, 650mm. and i also heard i need to do modifications so the barrel fits. so i was hoping to clear this out so i cant get done with this upgrade.