« previous next »
Pages: 1 2 3 [4]

Author Topic: Magpul  (Read 5156 times)

Offline RickEJ6

  • Trade Count: (0)
  • First Sergeant
  • *****
  • Posts: 473
    • View Profile
(No subject)
« Reply #45 on: March 05, 2005, 12:36:34 PM »
I think I have maybe ran 1 or 2 mags dry in the games I have played out here in AZ.  If I think im anywhere near the end of a mag I will toss a new one in I typically carry 12 mags on my gear, and I rarely go through more than a 4 or 5.  There was one game up in Prescott where I shot every single round that I had on me, which included reloaded and partialy used mags.  Now THAT was a fun game.
« Last Edit: December 31, 1969, 05:00:00 PM by RickEJ6 »
Logged
\"Do not hit if it can be avoided, but never hit softly.\"

T. Roosevelt

Offline Airsofter1

  • Global Moderator
  • Trade Count: (+1)
  • Major General
  • *****
  • Posts: 2511
    • View Profile
    • airsot airsona
(No subject)
« Reply #46 on: March 05, 2005, 12:37:26 PM »
Quote from: "busta_cap"
Cause you do SO many SPECOPS missions right mikey?  :P I found that you can actualy fit  7 M4 Mags..even 8 if your really carefull.. into a Normal sized ROLLY POLLY...


No Busta, I just happen to play a lot more than you :P!  You can fit that many mags in a RollyPoly, but you have to actually take a bit of time to get them in there to fit right.  With the CSM dumper you can just toss them in there with out needed to fidget with it to get that many to fit.

Ryan, I use para-cord type mag pulls too (cheap, easy, and simple).  I am hard on my toys like azsarge.  I have dropped many mags on concrete floors without any damage to them.  But thats just me...
« Last Edit: December 31, 1969, 05:00:00 PM by Airsofter1 »
Logged

Offline studdermonkey

  • Trade Count: (0)
  • Brigadier General
  • *****
  • Posts: 1733
    • View Profile
(No subject)
« Reply #47 on: March 05, 2005, 01:19:07 PM »
Yeah, I'm gonna do the Para-cord dealio after next game on my g36c mags. I'll get an m4 variant soon, but since my mags are fragile, I shouldn't drop them, which is where mag pulls will also come in use.. I can hold the cord till I can toss it safely or put it away.

And remember I said "Shouldn't"... I still do, which is why they'll break in no-time.. so those magpulls are well needed by me. ;-)
« Last Edit: December 31, 1969, 05:00:00 PM by studdermonkey »
Logged
كافر
Nate!

Offline -MAD- SARGE

  • Global Moderator
  • Trade Count: (0)
  • Lieutenant General
  • *****
  • Posts: 3279
    • View Profile
(No subject)
« Reply #48 on: March 05, 2005, 02:54:14 PM »
Quote from: "Airsofter1"
Ryan, I use para-cord type mag pulls too (cheap, easy, and simple)....


I know because I ended up with 4 of your mags from the Airsoft Arizona Black Market  [smilie=armata_pdt_34.gif]
« Last Edit: December 31, 1969, 05:00:00 PM by -MAD- SARGE »
Logged


Don't be an Escalefter.

Offline busta_cap

  • Trade Count: (0)
  • Lieutenant General
  • *****
  • Posts: 3887
    • View Profile
(No subject)
« Reply #49 on: March 05, 2005, 03:05:15 PM »
Quote from: "-MAD- SARGE"
Quote from: "Airsofter1"
Ryan, I use para-cord type mag pulls too (cheap, easy, and simple)....

I know because I ended up with 4 of your mags from the Airsoft Arizona Black Market  [smilie=armata_pdt_34.gif]
Airsoft parts in AZ are just like Havs mom, you get it, use it for a while, then pass it on. [smilie=armata_pdt_18.gif]

Matt try to take this one easy....I could not help myself..
« Last Edit: December 31, 1969, 05:00:00 PM by busta_cap »
Logged

Offline Jeff_White

  • Trade Count: (0)
  • Private
  • **
  • Posts: 22
    • View Profile
(No subject)
« Reply #50 on: March 05, 2005, 07:03:14 PM »
Quote
Airsoft parts in AZ are just like Havs mom, you get it, use it for a while, then pass it on.  

Matt try to take this one easy....I could not help myself..

Why?
Busta, for someone who goes apoplectic when the topic of younger airsoft players and maturity problems is noted, you frequently demonstrate an appalling lack of it. That was simply uncalled for. I am offended for Hav/Matt and I have never met his mom.
You owe them both an apology.
In the future you might find yourself to be the target of less criticism if you would show a bit of respect and self-restraint here.
« Last Edit: December 31, 1969, 05:00:00 PM by Jeff_White »
Logged
Jeff

Offline busta_cap

  • Trade Count: (0)
  • Lieutenant General
  • *****
  • Posts: 3887
    • View Profile
(No subject)
« Reply #51 on: March 05, 2005, 07:14:40 PM »
Quote from: "Jeff_White"
Quote
Airsoft parts in AZ are just like Havs mom, you get it, use it for a while, then pass it on.  

Matt try to take this one easy....I could not help myself..
Why?
Busta, for someone who goes apoplectic when the topic of younger airsoft players and maturity problems is noted, you frequently demonstrate an appalling lack of it. That was simply uncalled for. I am offended for Hav/Matt and I have never met his mom.
You owe them both an apology.
In the future you might find yourself to be the target of less criticism if you would show a bit of respect and self-restraint here.
The problem is you don't KNOW Matt, I do and I know he is not offended by it, as its more of an ongoing inside joke. So unless I am talking directly to you, I don't know why you are getting offended. No one around here seems to have a sense of humor. Get over yourself and stop getting so butt hurt about EVERYTHING.
« Last Edit: December 31, 1969, 05:00:00 PM by busta_cap »
Logged

Offline HavHav

  • Trade Count: (0)
  • Colonel
  • *****
  • Posts: 1474
    • View Profile
(No subject)
« Reply #52 on: March 05, 2005, 07:25:42 PM »
More something I expected from Tim. He actually deserves my mom...you know why? Because he CALLED HER BACK.

Still, you never really were part of it. Tim was the one who started it. Always was sort of me and his thing.
« Last Edit: December 31, 1969, 05:00:00 PM by HavHav »
Logged

Offline busta_cap

  • Trade Count: (0)
  • Lieutenant General
  • *****
  • Posts: 3887
    • View Profile
(No subject)
« Reply #53 on: March 05, 2005, 07:33:03 PM »
Ok back to topic....Either way you go, whether its ranger plates, OG magpul's or some paracord, its just personal preferance and what works for you and your budget. For about $10 bucks you could paracord 200 mags! For $30 you can get 12 OG magpul's. And for about $19 you get a set of three ranger plates. That reminds me that I actually need to paracord 3/4 of my mags. :)
« Last Edit: December 31, 1969, 05:00:00 PM by busta_cap »
Logged

Offline Daytr8er

  • Trade Count: (0)
  • Sergeant
  • *****
  • Posts: 115
    • View Profile
(No subject)
« Reply #54 on: August 24, 2006, 11:01:23 AM »
I just bought some ranger plates, and have a question.  With airsoft mags, do you put the magpul on without the new plate?  I don't see how it can be done being that airsoft mags don't have springs on the bottom like real mags.
« Last Edit: December 31, 1969, 05:00:00 PM by Daytr8er »
Logged
"I have come here to chew bubble gum and kick ass. . . and I\'m all out of bubble gum"
-Rowdy Roddy Piper

Offline Vince

  • Global Moderator
  • Trade Count: (0)
  • General
  • *****
  • Posts: 5230
    • View Profile
(No subject)
« Reply #55 on: August 24, 2006, 11:03:43 AM »
I don't have the locking plates on mine, and they work fine for me.

I think some people do, but there's also modifications necessary. You have to dremel the bottom of the mag or something. I had Riath do mine.
« Last Edit: December 31, 1969, 05:00:00 PM by Vince »
Logged


"I was having dinner with Andrew Ho, and he said I should have COL McKnight lead airsofters in mock combat. I said, "That is the gayest idea I have ever heard." - John Lu

Offline Daytr8er

  • Trade Count: (0)
  • Sergeant
  • *****
  • Posts: 115
    • View Profile
(No subject)
« Reply #56 on: August 24, 2006, 11:25:08 AM »
Thats what I figured.  I have the magpul on without the plate, and it still feels pretty sturdy.
« Last Edit: December 31, 1969, 05:00:00 PM by Daytr8er »
Logged
"I have come here to chew bubble gum and kick ass. . . and I\'m all out of bubble gum"
-Rowdy Roddy Piper

Offline Raith

  • Wait, what?
  • Global Moderator
  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2289
    • View Profile
(No subject)
« Reply #57 on: August 24, 2006, 01:57:21 PM »
Quote from: "Daytr8er"
Thats what I figured.  I have the magpul on without the plate, and it still feels pretty sturdy.


If you're not going to use the locking plates, I'd say pre-bend the magazine floorplate tabs inward a bit so that the Ranger Plate is nice and snug.  As part of your post game maintenence, check each mag to make sure its not loose.
« Last Edit: December 31, 1969, 05:00:00 PM by Raith »
Logged
Live free or die: Death is not the worst of evils.

Offline Ganef

  • Global Moderator
  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2103
    • View Profile
    • http://www.coyotetactical.blogspot.com/
(No subject)
« Reply #58 on: August 24, 2006, 04:40:55 PM »
I can do a visual guide to ranger plates assembly tonight and put it up.
« Last Edit: December 31, 1969, 05:00:00 PM by Ganef »
Logged
"Well, ain\'t we a pair, Raggedy Man..."

Offline pilz

  • Trade Count: (0)
  • Colonel
  • *****
  • Posts: 1350
    • View Profile
    • http://AMSOG.com
(No subject)
« Reply #59 on: September 03, 2006, 06:56:25 PM »
« Last Edit: December 31, 1969, 05:00:00 PM by pilz »
Logged
No longer airsofts... what a shame.
Pages: 1 2 3 [4]
« previous next »