JG G36 Flash Removal (Assistance Needed)

[Karasumori]

Hello, I wanted to get a better Flash Hider for my JG G36. I checked online to see how to remove the Flash Hider and it says that there is a Hex Screw on the Flash Hider. I cannot find said Hex Screw on mine. Please Help.

[davidneitzelt]

Its most likely on the bottom side. It should be on the closest part of the flash hider. After removing the screw, use a hair dryer and heat it up for like 5-10 minutes. If you can't get the screw out,  you can use a drill press to drill out the screw.

[Karasumori]

I looked. Its not there. Theres no holes at all on the flashider itself. or any Hex Screws present.

[davidneitzelt]

Well I would heat it up, try to slowly turn, if there's any resistance stop and look for the screw.

[headhunter]

is it plastic or metal

[Karasumori]

Plastic

[sabertooth]

melting it off will be the quickest but you lose the flashhider

[TheUNIT]

Here is what I did. Mine did not have the screw either.
1. Boil some water until it starts to bubble.
2. Move the wires back from the front (Fuse and anything close to the flash hider).
3. Boil for about 5 minutes.
4. Grab a towel if you intend to keep the flash hider, but if you do not care if something happens to it just grab some pliers and twist Clock Wise. (Use the towel over the flash hider and then use the pliers. Keeps from scratching or ripping it apart if it is plastic.)
5. You should have been able to get it off. (It does take some force in twisting it off)

I hope this helps!

[Benny1232]

I own a JG MK36C - My issue was that the screw was not going to come out just because there isn't really any tool out there to take it out, at least none that i could find. What i ended up doing is i got a friend who had a power tool saw and we just cut it from the back to the front right through where the hex screw is. Bending it off was the easy part.. In some cases there really isn't any other way than to mutilate the crap out of the orange flash hider in order to replace it with a mock silencer or a new flash hider.

Best of luck bud