Author Topic: Crosman C11  (Read 5958 times)

Offline Skeleton

  • Trade Count: (0)
  • Private
  • **
  • Posts: 22
    • View Profile
Crosman C11
« on: December 27, 2008, 02:24:59 AM »
Well it's a C11? I got if from walmart. I got board so I was looking at there gun's and the FPS.I noticed that this one was the only gas gun and it had 400 FPS so I got it.

Well it's plastic which didn't surprise me at all but I was looking at it in the car and I noticed that it was on fire? which I wasn't happy about but I'm a safety freak!
The mag will hold up to 15 BB's over all I like it but there are some problems.
 The gas goes in the grip/handle but you have to pull the grip sideways to get it in and its vary flimsy.
That's about it so far I hear that it is strong but well see.

I love how it shoot's, it's so fun. But Ive only shot it in my garage because I got it today so it scares the shit out of me when the BB's fly past me lol. Its about 400FPS maybe higher from my chrono test. But I'll have to do that again tomorrow too it shoot's as fast as you can pull the trigger so that's always good I guess. Its almost dead accurate I got like less than a centimeter from what I was aiming for!  

So I'd give it a 7/10 it is probably going to be the best walmart gun you will ever buy I almost shit myself when I saw this
I love it lol.
well that's my review
I dicided to post some pics but I'm using a phone camera so sorry if there crappy

the mag


the flimsy CO2 department
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Dont hessatate to pull that trigger


^^WEST CANYON RANGERS^^
PM me if you wanta join

Offline Skeleton

  • Trade Count: (0)
  • Private
  • **
  • Posts: 22
    • View Profile
Re: Crosman C11
« Reply #1 on: December 28, 2008, 01:04:45 AM »
Well I was working on my bike got stressed so I went to unload on a can lol and it broke I think it might just be jammed... but cant unjam it
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Dont hessatate to pull that trigger


^^WEST CANYON RANGERS^^
PM me if you wanta join

Offline Nil8r

  • Trade Count: (+1)
  • General
  • *****
  • Posts: 9999
    • View Profile
Re: Crosman C11
« Reply #2 on: December 28, 2008, 01:13:23 AM »
Lasted less than a day? Take it back, buy something better.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Skeleton

  • Trade Count: (0)
  • Private
  • **
  • Posts: 22
    • View Profile
Re: Crosman C11
« Reply #3 on: December 28, 2008, 04:24:56 PM »
Quote from: "Nil8r"
Lasted less than a day? Take it back, buy something better.
No it was just because it was just jammed I just unjammed it and I spayed it w/ wd-40 it works fine
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Dont hessatate to pull that trigger


^^WEST CANYON RANGERS^^
PM me if you wanta join

Offline SARC

  • Trade Count: (0)
  • Sergeant First Class
  • *****
  • Posts: 264
    • View Profile
Re: Crosman C11
« Reply #4 on: December 28, 2008, 10:00:32 PM »
Quote from: "Skeleton"
Quote from: "Nil8r"
Lasted less than a day? Take it back, buy something better.
No it was just because it was just jammed I just unjammed it and I spayed it w/ wd-40 it works fine


WD40 is the DEVIL.... [-X
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Nil8r

  • Trade Count: (+1)
  • General
  • *****
  • Posts: 9999
    • View Profile
Re: Crosman C11
« Reply #5 on: December 28, 2008, 11:15:27 PM »
WD40 will kill the internals on gas pistols, because it will degrade the rubber seals. For future reference, only use 100% silicone to clean and lubricate airsoft guns, and be sure to avoid anything with petroleum in it.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Skeleton

  • Trade Count: (0)
  • Private
  • **
  • Posts: 22
    • View Profile
Re: Crosman C11
« Reply #6 on: December 29, 2008, 01:29:31 AM »
sorry I'm new to gas guns
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Dont hessatate to pull that trigger


^^WEST CANYON RANGERS^^
PM me if you wanta join

Offline sonjamichelle

  • Trade Count: (0)
  • Private First Class
  • ***
  • Posts: 36
    • View Profile
Re: Crosman C11
« Reply #7 on: December 29, 2008, 10:37:50 AM »
Quote from: "Skeleton"
sorry I'm new to gas guns

That goes for ANY airsoft gun, AEG, GBB, Springers, etc.  Pretty much for all rubber and plastic components. Petroleum Distillates are BAD for those materials.

Besides, stay away from the Crossman "airsoft" guns. They're poor quality.  If it's available at the same store,go for the SoftAir (rebranded KWC) Taurus 24/7 CO2 Pistol.



I've put about 20,000 rounds through mine in the past 6 months and it continues to work flawlessly. I bought it for $50 from Academy Sporting Goods in Austin.

Available on Amazon: http://www.amazon.com/Firepower%C2%AE-T ... B000YIH90C

Spare Mags: http://www.pyramidairsoft.com/ProductDe ... uctID=1438

Each  CO2 cartridge will yield about 250 shots, that's 15 to 17 magazine fills. Ads quote 380fps, but that's probably with cheap .12s. With good quality .20s it consistently shoots 290fps.  Just right for CQB and plinking in the backyard.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Sonja Michelle Lina Thomas


Offline Skeleton

  • Trade Count: (0)
  • Private
  • **
  • Posts: 22
    • View Profile
Re: Crosman C11
« Reply #8 on: December 29, 2008, 04:13:35 PM »
Quote from: "sonjamichelle"
Quote from: "Skeleton"
sorry I'm new to gas guns

That goes for ANY airsoft gun, AEG, GBB, Springers, etc.  Pretty much for all rubber and plastic components. Petroleum Distillates are BAD for those materials.

Besides, stay away from the Crossman "airsoft" guns. They're poor quality.  If it's available at the same store,go for the SoftAir (rebranded KWC) Taurus 24/7 CO2 Pistol.



I've put about 20,000 rounds through mine in the past 6 months and it continues to work flawlessly. I bought it for $50 from Academy Sporting Goods in Austin.

Available on Amazon: http://www.amazon.com/Firepower%C2%AE-T ... B000YIH90C

Spare Mags: http://www.pyramidairsoft.com/ProductDe ... uctID=1438

Each  CO2 cartridge will yield about 250 shots, that's 15 to 17 magazine fills. Ads quote 380fps, but that's probably with cheap .12s. With good quality .20s it consistently shoots 290fps.  Just right for CQB and plinking in the backyard.
lol I know crossman is cheap but some how this one isn't and I won't use anything less than 300 fps
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Dont hessatate to pull that trigger


^^WEST CANYON RANGERS^^
PM me if you wanta join

Offline sonjamichelle

  • Trade Count: (0)
  • Private First Class
  • ***
  • Posts: 36
    • View Profile
Re: Crosman C11
« Reply #9 on: December 29, 2008, 10:00:10 PM »
Quote from: "Skeleton"
lol I know crossman is cheap but some how this one isn't and I won't use anything less than 300 fps

Might want to change that thinking about 300fps.

320fps inside of 20 foot engagement range:
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Sonja Michelle Lina Thomas


Offline airsofting4god

  • Trade Count: (0)
  • Staff Sergeant
  • *****
  • Posts: 220
    • View Profile
Re: Crosman C11
« Reply #10 on: December 30, 2008, 09:06:51 AM »
haha whoa that looks pretty bad .
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Primary:Custom M4

A \'touchy-feelie\' CNN reporter, while interviewing a Marine sniper,asked,
"What do you feel when you shoot a terrorist."  The Marine shrugged and replied, "Recoil."

Offline sonjamichelle

  • Trade Count: (0)
  • Private First Class
  • ***
  • Posts: 36
    • View Profile
Re: Crosman C11
« Reply #11 on: December 30, 2008, 11:15:10 AM »
And you wonder why I ask everyone about their overwhelming desire to have 400+fps AEG. My Marui MP5 shoots 270fps w/.20, just perfect for CQB and no field or group I've skirmished with has ever had a grievance about it. My Cyma MP5 shoots 340-350fps w/.20 and I can reach a decent range in the woods. My pistol shoots anywhere from 240-290fps w/.20 depending on gas and temp.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Sonja Michelle Lina Thomas


Offline Skeleton

  • Trade Count: (0)
  • Private
  • **
  • Posts: 22
    • View Profile
Re: Crosman C11
« Reply #12 on: December 31, 2008, 07:51:52 PM »
Quote from: "sonjamichelle"
And you wonder why I ask everyone about their overwhelming desire to have 400+fps AEG. My Marui MP5 shoots 270fps w/.20, just perfect for CQB and no field or group I've skirmished with has ever had a grievance about it. My Cyma MP5 shoots 340-350fps w/.20 and I can reach a decent range in the woods. My pistol shoots anywhere from 240-290fps w/.20 depending on gas and temp.
Were did you get your MP5 because my CYMA MP5 only shoot's 300 and barely dose anything but than again it's a LPEG
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Dont hessatate to pull that trigger


^^WEST CANYON RANGERS^^
PM me if you wanta join

Offline Exarach

  • Trade Count: (+7)
  • Brigadier General
  • *****
  • Posts: 1769
    • View Profile
Re: Crosman C11
« Reply #13 on: January 01, 2009, 05:06:54 PM »
To Skel- if you need any assistance in the area of gas gun maintainace, I am a gas pistol freak. I love them. I can help you with whatever you need. And, if you are looking for a gas pistol, a KWA sounds like it would suit your needs, I can't say definately, but to the extent of my knowledge, they are all over 300fps, and function flawlessly. A little pricey, but you will always get your moneys worth.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
\"Friendly fire isn\'t\"
If a speeding pellet in a quiet woods hits a noob in the face, and he cries, does anyone care?

Offline Mad Max

  • Trade Count: (0)
  • Private
  • **
  • Posts: 13
    • View Profile
    • http://bullydogairsoftgrenades.webs.com/
Re: Crosman C11
« Reply #14 on: February 26, 2009, 12:05:22 AM »
I had that gun, now it is the russian rulette gun ha ha it decides when it wants to shoot, it takes like three-god know how many trigger pulls to work! ha ha but what do you expect from wal-mart lol :|
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Image Hosting
[size=150]Eli Lewis BDAS 2009 Gunner/Grenadier[/size]