Author Topic: How do I make my m15a4 Semi-auto Only?  (Read 894 times)

Offline Longshot

  • Trade Count: (0)
  • Private First Class
  • ***
  • Posts: 26
    • View Profile
How do I make my m15a4 Semi-auto Only?
« on: March 17, 2009, 04:59:06 PM »
Hey guys I am trying to turn my  Ca M15A4(old type) into a sniper, I need to know how I could make it semi automatic only. If I can make it semi only, would I be able to shoot 500 fps with .20s? You know, so I can actually use it at the matches. thanks in advance.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline RecoilEF

  • Trade Count: (0)
  • Corporal
  • ****
  • Posts: 85
    • View Profile
Re: How do I make my m15a4 Semi-auto Only?
« Reply #1 on: March 17, 2009, 05:44:27 PM »
The way i did mine is that i took my selector plate and used a dremel to grind down the piece that switches the semi-auto disconnector. Normally when you swtich to full auto, the selector plate slides back a couple of mm and that pushes the semi-auto disconnecter away from the sector gear so that it no longer resets the trigger after every shot. Grind a small part of the plate away and even in full auto, it will still shoot semi. If you want pictures to clearify i can PM them to you.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Longshot

  • Trade Count: (0)
  • Private First Class
  • ***
  • Posts: 26
    • View Profile
Re: How do I make my m15a4 Semi-auto Only?
« Reply #2 on: March 18, 2009, 08:15:32 AM »
Can you go ahead and send me some picks? or a tut, It will be much appreciated. :)
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline RecoilEF

  • Trade Count: (0)
  • Corporal
  • ****
  • Posts: 85
    • View Profile
Re: How do I make my m15a4 Semi-auto Only?
« Reply #3 on: March 18, 2009, 10:53:05 AM »
I just googled a selector plate and edited it, didn't feel like whipping out the camera to take a picture of my selector plate lol. Just grind down the area i boxed in red and your rifle will be semi-auto. There's no turning back from this unless you buy a new selector plate so make sure you're certain you want semi only. Also with this modification, that little spring might fall out easier if you're handeling it wrong.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline JoJockAmo

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 642
    • View Profile
Re: How do I make my m15a4 Semi-auto Only?
« Reply #4 on: March 18, 2009, 02:40:30 PM »
do as he has, cut away the section out lined in the picture, try to get a longer spring to make up the difference in the new cut length.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

THIS IS CETI ALPHA FIVE! (and don\'t you forget it)