NEW HOP UP BEING A B*#@H

[Nofatchicks]

Need Help with my hop up! okay so I bought a madbull 363mm 6.03 version II tight bore barrel--- http://www.airsoftgi.com/product_info.php?cPath=31_55&products_id=1233and the Madbull Ultimate 3-1 Hop Up Chamber. ---  http://www.airsoftgi.com/product_info.php?cPath=31_170&products_id=5986 Now I have installed it on my G&G G4-A1 and i'm using the Green G&G hop up bucking, due to the fact the madbull hop up bucking (Blue) is being difficult to install.

THE PROBLEM: Okay so now that everything is installed I went to go shoot it and nothing will come out.... and yes the bb's are feeding into the chamber but not being discharged, now i'm not to sure what the problem is so any help would be greatful!

[bailey5671]

Your links dont work. Just install the madbull bucking by spraying the outer part with a little silicon lube and the bucking should slide right in nice and tight. Personally I think the G&g bucking is better but try installing the madbull one and see if your gun starts to feed and shoot well.

[Nofatchicks]

Dont have any Silicon lube -_- lol

[bailey5671]

then it makes sense why its hard to get the buckings in right.... :/

[Nofatchicks]

well the Green one slides right in , i've gotten the blue one in but when I look through it the back of it (the part that slides in first) gets all crammed up and isn't a perfect circle like it should be so idk lol =]

[krdoloroso]

Not sure but, you know how the gearbox works... Like everytime the spring is released the airseal nozzle moves forward to the bb to thrust air to it... Check if it's moving right... This is happening to my gun... And i don't know how to fix it...

Anybody have the same expirience? How did you fix it?

[Dayton]

Not sure but, you know how the gearbox works... Like everytime the spring is released the airseal nozzle moves forward to the bb to thrust air to it... Check if it's moving right... This is happening to my gun... And i don't know how to fix it...

Anybody have the same expirience? How did you fix it?

Replace the tappet plate with a stock JG Full Metal one.

[Nofatchicks]

Not sure but, you know how the gearbox works... Like everytime the spring is released the airseal nozzle moves forward to the bb to thrust air to it... Check if it's moving right... This is happening to my gun... And i don't know how to fix it...

Anybody have the same expirience? How did you fix it?

Replace the tappet plate with a stock JG Full Metal one.

Where would be the best place to get one ASAP?

[Nofatchicks]

Thanks guys for your help its working now!

[bailey5671]

Not sure but, you know how the gearbox works... Like everytime the spring is released the airseal nozzle moves forward to the bb to thrust air to it... Check if it's moving right... This is happening to my gun... And i don't know how to fix it...

Anybody have the same expirience? How did you fix it?

Replace the tappet plate with a stock JG Full Metal one.

Where would be the best place to get one ASAP?

  LOL DAYTON YOUR THE BEST!

[Dayton]

I was hoping somebody would pick up on that. 

[Nofatchicks]

haha I got that haha JG Piston!

[krdoloroso]

Yot ni na yo!

If there was a metal tappet plate... ...

I like jg... But i own a tm...

What ever works...